SCAN 61 User's Guide download pdf (Page 36)

Chapter 2 — Connecting the SR61B

24 SR61B Cordless Scanner User’s Guide

Pairing as an SPP Bluetooth Device

This section describes how to pair your scanner from your host PC.

To pair as an SPP Bluetooth device

1 Turn on your scanner by pulling the trigger.

2 Scan the Bluetooth device profile - SPP configuration bar code.

Bluetooth Device Profile - SPP (*)

3 Double-click the Bluetooth icon on your task bar. The Bluetooth

Devices window appears.

4 Click on the command for adding a Bluetooth device (Add or Add

a device depending on operating systems). The wizard for adding

Bluetooth devices appears.

5 Follow the on screen instructions until your host searches for

Bluetooth devices. The SR61B scanner appears in the Bluetooth

device list in the following format: SR61B - BDA, where BDA is the

scanner’s Bluetooth Device Address.

You can find the BDA on the scanner’s label.

6 Select your scanner and validate.

7 If a PIN is required (depending on your host operating system and

Bluetooth version), enter the default Bluetooth PIN (0000) and

validate.

Your scanner is now paired with your host. Two virtual Standard

serial ports over Bluetooth link (incoming and outgoing) are

created.

Note: If the scanner does not appear in the list, it might be already

paired with the host. Under some operating systems, paired devices do

not appear in the Bluetooth device search list.

Note: A pairing confirmation can be enabled. If so, the blue Intermec

Ready-to-Work indicator starts blinking rapidly at this stage,

indicating that the scanner is awaiting acknowledgement. Pull the

trigger to complete the pairing procedure.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 77 78

No comments

SCAN 61 User's Guide Page 36