SCAN 61 User's Guide download pdf (Page 38)

Chapter 2 — Connecting the SR61B

26 SR61B Cordless Scanner User’s Guide

Connecting from your Scanner as an SPP Bluetooth

Device

This section describes how to perform a scanner-initiated connection,

for example prior to collecting data.

To connect from the scanner

1 Once your scanner is paired, turn it on by pulling the trigger. Make

sure it is set as an SPP Bluetooth device.

2 Start EasySet version 5.6.5.3 or later. Make sure that SR61B is

selected as your product.

3 Select the Interface > Bluetooth > Connect/disconnect folder.

4 Double-click on the Compose BT address command. A

Bluetooth - Connect/disconnect - Compose BT address

window opens.

5 Compose your host Bluetooth Device Address (BDA) and click

OK. The Bluetooth association bar code is created.

6 Print and read the Bluetooth association bar code. The blue

Intermec Ready-to-Work starts blinking.

7 Open the incoming port that you noted at the end of the pairing

procedure, for example from a terminal emulation program.

When the scanner connects to your host PC, it emits a series of

beeps from low to high, and the blue Intermec Ready-to-Work

indicator turns solid blue.

8 To disconnect, close the incoming port.

When the scanner disconnects from your host PC, it emits a series

of beeps from high to low, and the blue Intermec Ready-to-Work

indicator turns off. The LED starts blinking.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

No comments

SCAN 61 User's Guide Page 38